Carefully inspect the area and pinpoint where water is entering
Carefully inspect the area and pinpoint where water is entering
Remove laitance, dust, and contaminants using pressure washing or grinding. Apply primer evenly to enhance adhesion and surface bonding
Seal visible cracks, joints, and correct any surface irregularities
Follow the recommended procedure, including the number of coats and target film thickness
Apply only to clean, dry, and cool substrates – avoid dusty, wet, or sun-heated surfaces.
Do not apply under direct sunlight or during rain
Avoid peak heat hours; late afternoon application is recommended
Suitable temperature range: +10°C to +35°C (substrate and ambient)
Apply only to clean, dry, and cool substrates – avoid dusty, wet, or sun-heated surfaces.
Do not apply under direct sunlight or during rain
Avoid peak heat hours; late afternoon application is recommended
Suitable temperature range: +10°C to +35°C (substrate and ambient)
Wear proper PPE: gloves, goggles, and a safety mask
Avoid skin and eye contact during handling
Refer to the product’s SDS and TDS for full safety and compatibility guidance
