• No Need to Remove Tiles – Just Brush On and Seal
• Deep-Penetrating, Clear Waterproofing for Tiled Surfaces
Benefits
Ideal for repairing leaks caused by water penetration through grout lines
Penetrates 5–6 mm into grout and forms a durable waterproof barrier
Simple brush-on application – ideal for both professionals and DIYers
Effective with just one coat
Recommended Use
Bathrooms, balconies, terraces, and other tile surfaces
Suitable for repairing leaks from grout lines
For indoor and outdoor use
Packaging &Coverage
Packaging : 500g plastic bottle
Coverage per 500g (approx.) – 200×200 mm tile: 8–23㎡ – 150×150 mm tile: 6–16㎡ – 100×100 mm tile: 4–10㎡ (Coverage may vary with substrate and application)
Application Steps
Step 1 : Substrate Preparation Clean tiles and grout lines thoroughly (remove dust and residues) Let surface dry completely (at least 24 hours after cleaning) Fill deep grout lines or cracks with cement or silicone sealant before use
Step 2 : Product Preparation Shake well before use
Step 3 : Substrate Hardener Application Apply directly to grout with the included brush
Step 4 : Drying Time Let dry for 24 hours before water exposure
Notes
Confirm leak source is grout, not plumbing or drainage
Not for high-pressure areas (e.g., pools, tanks)
Not suitable for commercial kitchens (grease exposure)
Do not apply to damp or rising moisture conditions
Clean residue with warm water after 48 hours to avoid stains
Not for epoxy or non-absorbent grouts
Refer to P5 “Application, Storage &Safety Instructions”
