Benefits

• Excellent adhesion to concrete, mortar, existing membranes, and various  substratesRefer to page 5 " Pre-Application Checklist for Waterproofing" 
  
• Easy to apply with small brush
  

Recommended Use

• Improves adhesion to concrete and mortar substrates
  
• Suitable for interior, exterior, and high-moisture environments (substrate must be dry)
  

Packaging &Coverage

• Packaging : 6 kg Pail + embedded fabric 90m
  
• Coverage   : Up to approx. 50 m (2-coat system with embedded fabric)
  (Coverage may vary with substrate and application) 
  

Packaging &Coverage

• Packaging : 6 kg Pail + embedded fabric 90m
  
• Coverage   : Up to approx. 50 m (2-coat system with embedded fabric)
  (Coverage may vary with substrate and application) 
  

Application Steps

• Step 1 : Substrate Preparation
  Refer to page 5 " Pre-Application Checklist for Waterproofing" 
  
• Step 2 : Product Preparation
  Stir before use : do not dilute with water.
  
• Step 3 : First Application
  Apply the first coat over the crack using a brush.
  While still wet, embed nonwoven fabric directly into the coating.
  Immediately apply a second coat to fully saturate the fabric.
  Allow to dry until touch-dry.
  
• Step 4 : Second Application
  Repeat the same method: apply coating, embed fabric, and apply a second coat Ensure each layer becomes touch-dry before proceeding
  
• Step 5 : Drying Time
  Proceed to next step once touch-dry (approx. 30 minutes to 2 hours)
  

Notes

• Refer to page 5 “Application, Storage & Safety Instructions.”